Landlords and property managers in Titusville carry a different kind of electrical list than a homeowner does. A homeowner calls when something stops working. A landlord calls when a unit has to be ready for the next tenant, when an inspection has flagged something that needs to be corrected before a certificate is issued, or when a problem in one unit is affecting another. The work is the same trade, but the stakes and the schedule are different, and we handle both.
We take calls from rental property owners, commercial clients, and residents across Titusville and the surrounding area. Whether the job is a safety inspection before a tenant moves in, a panel that can no longer carry the load the building puts on it, or a circuit that has to be added before a new appliance can be connected, we scope it on the call and give a price before anything is scheduled. We are available every day from 5:30 AM to 8:00 PM.
When something stops working and it will not wait, the first thing you want to know is whether someone can get out quickly. We take short-notice calls and work them in when the schedule allows. Availability for a specific slot is confirmed when you call, not promised here, but urgent faults are the kind of work we prioritize.
For rental properties, timing matters in a way it does not always for owner-occupied homes. A tenant living without a working kitchen circuit, or a business that cannot close for the afternoon while a panel is upgraded, has a real constraint. We work through what the job involves on the call, explain what the visit will require, and plan around the situation. If a job can be done in phases to keep the space usable, we say so before we start.
The call is where the scope gets established. We go through what you are dealing with, what the likely cause is, and what the job will take to complete. You get a price during that conversation, before anything is booked. If the scope changes once we can see the wiring on site, we explain what changed before proceeding.
Burning smells near outlets or panels, breakers that will not reset, and sudden loss of power to part of a building are situations we treat as urgent.
Call (321) 599-3556 and describe what you are seeing.
We confirm what is available and get the visit on the schedule.
Not every electrical job requires a full shutdown. Replacing an outlet, adding a GFCI receptacle, or swapping a ceiling fixture usually means isolating one circuit while the rest of the building stays live. A panel upgrade or a service-entrance replacement is a different matter. Those jobs require the main breaker to come off, and the whole building goes dark for part of the work.
When a job does require a full shutdown, we plan around it. For someone working from home, that means knowing in advance how long the power will be off and what work will be done in that window. For a business that has to stay open, we look at whether the job can be staged, which circuits can stay live while others are worked, and what the realistic timeline is before the main comes back on. The scope and the interruption plan are part of the conversation before the visit is booked.
Titusville's housing stock runs the range from older single-family homes to apartment buildings, rental units, and small commercial properties. The jobs that come out of a city this size are specific, and it helps to know what each one actually involves before you call.
Ground-fault and arc-fault protection are required by code in kitchens, bathrooms, garages, and exterior circuits, and older homes frequently lack one or both. A GFCI outlet cuts power the instant it detects a ground fault, which is the protection that matters near water. An AFCI breaker responds to the kind of arcing that happens inside a damaged wire before it starts a fire. We install both where they are required and where they are missing.
A dead outlet is sometimes a tripped GFCI upstream. Sometimes it is a failed receptacle, a loose connection, or a wiring problem further back in the circuit. We trace it before replacing anything. Switch work covers standard replacements, dimmers, and multi-location switching where a fixture needs to be controlled from more than one point. Ceiling fan installation includes running the wiring to the ceiling location when no existing circuit is there.
Low-voltage work covers doorbell wiring, data and network cable rough-in, and the wiring that supports security and access systems. It is often scheduled alongside other electrical work during a renovation or a tenant build-out, and we coordinate it with the rest of the job so the walls do not have to be opened twice.
A dryer, electric range, or large refrigerator each needs its own circuit sized for the load it draws. Running a high-draw appliance on a shared circuit is a common cause of tripping breakers and, over time, a wiring problem. Before a dedicated circuit is run, we check that the panel has the available capacity to carry it. If it does not, a panel upgrade is the first step. We scope both on the call.
Homes of a certain age carry wiring that was correct when it was installed and has not always been updated since. Two-prong ungrounded outlets are a common finding in older properties. So is wiring that was run for the electrical loads of a different era, before central air conditioning, home offices, and multiple large appliances became standard in a single household.
Aluminum branch-circuit wiring turns up in some of the area's older homes as well. The risk is not in the wire itself but in the connection points, where aluminum and copper meet at outlets, switches, and breakers. Those connections loosen over time and create heat. Remediation addresses each connection point with the correct materials. A full rewire with copper is the more complete solution when aluminum wiring is found throughout the home.
Knob-and-tube wiring, where it still exists, is a different situation. It was not designed for grounded circuits, it cannot support modern loads, and it is not compatible with the insulation that often gets added around it. We assess what is there and explain what the options are before recommending any path forward.
Electrical pricing reflects what the job actually involves, and the only way to give an accurate number is to understand the scope. The fault has to be traced before a repair can be priced. A panel upgrade depends on the current service size, what the new panel needs to carry, and whether the service entrance needs work at the same time. A new circuit depends on where it has to run and what it feeds.
We go through all of that on the call. You get a price before the visit is booked, based on what the job is likely to involve. If the work on site turns out to be different from what the call suggested, we explain the difference before we proceed. With a local company, a question about the work gets a straight answer.
If you have questions about what a specific job covers or what would change the price, ask on the call. That is the right place for that conversation, and it is how the price stays accurate rather than approximate.
We cover Titusville and the surrounding communities throughout Brevard County. Port St. John, Mims, Sharpes, North Merritt Island, and Christmas are all areas we take calls from. If you are in the area and not sure whether we cover your address, call and ask.
We are available every day from 5:30 AM to 8:00 PM. Residential, rental, and commercial calls are all handled the same way: scope on the call, price before the visit, work done to the code that applies here. Have a look at our full list of electrical services for the work broken down.
Rough-in is the stage where wiring is run through open walls and boxes are placed, before drywall is installed. Trim-out is when we return after the walls are finished to install outlets, switches, fixtures, and cover plates. Both stages are part of a new installation or a renovation that involves opening walls.
Rental properties of a certain age frequently turn up ungrounded two-prong outlets, panels that are at or past capacity, and missing GFCI protection in kitchens and bathrooms. These are common findings during pre-tenancy inspections and come up regularly when a landlord is preparing a unit for a new occupant. We go through what the property needs on the call and scope the work before anything is scheduled.
Permit requirements depend on the type of work and where it is located on the property. Some jobs, like a panel replacement or new service entrance, typically require a permit and inspection. Others, like replacing an outlet or a ceiling fan, often do not. We confirm what applies to your specific job before the work starts, so there are no gaps in the paperwork on your end.
A tenant can call us directly at (321) 599-3556 to describe the fault and get it on the schedule.
In practice, we confirm the scope and the cost with whoever is responsible for the bill before any work begins, so the landlord or property manager stays in the loop on pricing.
One call. One electrician. One price, agreed first.
Describe what you are dealing with and we go through the job, give you a price, and confirm the visit. For urgent calls, ask about the schedule and we confirm what is available before anything is booked.
Reach us at (321) 599-3556 every day from 5:30 AM to 8:00 PM.
Browse our town-by-town list. Also serving the towns around: Port St. John, Cocoa, Cocoa West, Cape Canaveral.
Titusville's housing stock runs from mid-century homes with original fuse boxes to newer construction with modern load demands, and commercial properties that sit in a different category entirely. We work across all of it, from a single outlet that stopped working to a full panel upgrade ahead of storm season. Call us with what you are dealing with and we will scope the job on the phone, give you a price before anything is scheduled, and get the work done right. Below is a quick look at what we cover and what to expect from each service.
| Type of Work | What the Job Involves | Common Situations | What to Keep in Mind |
|---|---|---|---|
| Electrical Safety Inspections |
| Home buyers, landlords preparing a unit for rental, and property managers dealing with a flagged code issue | We go through the panel, the circuits, the outlets, and the visible wiring and explain what we find before recommending any work. |
| Outdoor and Dock Circuits |
| Waterfront properties, homes with outdoor kitchens or living spaces, and dock owners adding power | Outdoor circuits require weatherproof materials and GFCI protection throughout. We confirm the circuit is properly protected before the work is finished. |
| Electrical Panel and Service UpgradesMost Popular |
| Homes adding EV chargers, major appliances, or carrying older panels that cannot meet current demand | Air conditioning runs hard year-round in this area, and when you add a Level 2 charger or an electric range, the math on panel capacity changes fast. We run the load calculation first. |
Call us at (321) 599-3556, seven days a week from 5:30 AM to 8:00 PM, and we will go over what you are dealing with, scope the job, and give you a price before anything is booked.
(321) 599-3556